201020 201020 201404 201523 201114 201116 606 12 mm 15/32" • • • • 6 × 47 mm 8 × 53 mm Weitere Informationen erhalten Sie telefonisch unter +49 6203-4039-0 oder schreiben Sie eine Mail an info@karnasch.tools. For more informations please call +49 6203-4039-0 send a mail to info@karnasch.tools. LOCHSÄGEN • HOLE SAWS Verjüngter Zentrierbohrer zum Anbohren ohne Verlauf. Ankörnen ist überflüssig. Tapered center drill for centering without running off. Center punching not necessary. Auswurffeder Ejector spring Schaft · Shank • 14-69 mm = 10 mm • 70-200 mm = 13 mm EIGENSCHAFTEN · PROPERTIES Handmaschinen · Handheld machines Maximal empfohlener ∅ 180 mm Maximum recommended ∅ Maximal empfohlene Schnitttiefe 6 mm Maximum recommended cutting depth Maximal mögliche Schnitttiefe 12 mm Maximum possible cutting depth Stationäre und Kernbohrmaschinen Stationary and core drilling machines Maximal empfohlener ∅ 200 mm Maximum recommended ∅ Maximal empfohlene Schnitttiefe 8 mm Maximum recommended cutting depth Maximal mögliche Schnitttiefe 12 mm Maximum possible cutting depth Leichtlauf Ausführung speziell für Handmaschinen (selbstverständlich auch für stationäre Maschinen verwendbar) Durch dünne Schnittbreite von nur 1,8-2,0 mm: → wenig Schnittdruck → schnelles und leichtgängiges Bohren → exzellente Führung und Kontrolle während des Bohrvorgangs → Schnelle Bohrkernentfernung durch Auswurffeder bei allen Durchmessern. (Bei maximalen Schnitttiefen ist die Auswurffeder zu entfernen) Anwendungshinweis: Bei größeren Materialstärken pro Arbeitsgang 2-3 mm bohren, danach jeweils Späne entfernen. Verwenden Sie bitte bei allen Metallen gutes Schneidöl (siehe ab Seite 1265) Smooth running version specifically for portable machines (of course, also to be used for stationary machines) Because thin cutting width of only 1.8-2.0 mm: → Low cutting pressure → fast, smooth-running drilling → excellent guidance and control during drilling → Quick removal of drilled core through ejector spring for all hole saws. (If drilling maximum cutting depths please remove the ejector spring) Application note: At thicker materials: Cut 2-3 mm per cutting process, remove chips afterwards. Use only good cutting oil for metal (see from page 1265) • 14-150 mm = 1,8 mm • 155-200 mm = 2,0 mm Schnittbreite Cutting width Alu Alu Stahl Steel Edelstahl Stainless Kupfer, Messing, Zinn Copper, brass, tin Kunststoffe GFK/CFK Plastics GRP/CRP SandwichMaterial Sandwich materials Grauguss Grey cast iron ANWENDUNG · APPLICATION SECHSKANTSCHRAUBE ZUM BEFESTIGEN DES ZENTRIERBOHRERS HEXAGON SCREW FOR FIXING THE CENTER DRILL ZENTRIERBOHRER MIT FEDER CENTER DRILL WITH SPRING Hartmetall-bestückte Lochsäge, Nutzlänge 12 mm. Komplett mit Schaft, Zentrierbohrer und Auswurffeder Carbide tipped hole saw, drill depth 12 mm | 15/32". Complete with shank, center drill and ejector spring Ersatzteile für Hartmetall-bestückte Lochsäge, Nutzlänge 12 mm. Spare parts for Carbide tipped hole saw, drill depth 12 mm | 15/32". = Für Lochsägen • 14-150 mm = For hole saws • 14-150 mm Für Lochsägen • 14-150 mm For hole saws • 14-150 mm Für Lochsägen • 155-200 mm For hole saws • 155-200 mm = Für Lochsägen • 155-200 mm = For hole saws • 155-200 mm < 1400 N > 900 N > 10% Si M6 x 8 M8 x 8 EASY-CUT 5 EASY-CUT 5 10 Index 9 8 OIL 7 MACHINES 6 5 4 3 2 1
RkJQdWJsaXNoZXIy MTgxNTQ=