401070 401060 401060030 401060040 401060050 401060060 401060080 401060100 401060120 401070040 401070050 401070060 401070080 401070100 744 l1 l2 d2 d1 d3 l3 l1 l2 d2 d1 d3 l3 M 3 • 2,5 3,4 3,4 8,8 20,0 52,0 M 4 • 3,3 4,5 4,5 11,4 24,0 58,0 M 5 • 4,2 5,5 5,5 13,6 28,0 66,0 M 6 • 5,0 6,6 6,6 16,5 31,0 70,0 M 8 • 6,8 9,0 9,0 21,0 40,0 84,0 M 10 • 8,5 11,0 11,0 25,5 47,0 95,0 M 12 •10,2 13,5 13,5 30,0 54,0 107,0 M 4 • 4,3 8,6 8,6 30,0 55,0 110,0 M 5 • 5,3 10,4 10,4 30,0 55,0 110,0 M 6 • 6,4 12,4 12,4 30,0 55,0 110,0 M 8 • 8,4 12,5 16,4 30,0 70,0 110,0 M 10 •10,5 12,5 20,4 30,0 70,0 110,0 Weitere Informationen erhalten Sie telefonisch unter +49 6203-4039-0 oder schreiben Sie eine Mail an info@karnasch.tools. For more informations please call +49 6203-4039-0 send a mail to info@karnasch.tools. HSS-XE Kurzstufenbohrer mit langer Bohrstufe für Durchgangsloch 90° HSS-XE stub subland drill with long drilling step for through holes HSS-XE Kurzstufenbohrer für Kernloch, 90° Ansenkung HSS-XE stub jobber drills for tapping holes, 90° countersink EIGENSCHAFTEN · PROPERTIES Verwendung: Für Schrauben- und Durchgangslöcher nach DIN-ISO 273 und Senkungen nach DIN 74 Blatt 1 Form A, Ausführung mittel. Für Schrauben nach ISO 2009, 2010, 7046, 7047 (DIN 963, 964, 966). Besonders geeignet für Bohrungen mit gleichzeitiger Ansenkung in Profilmaterial. Use: For through holes for screws DIN-ISO 273 and countersinks to DIN 74, sheet 1 form A, medium grade. For screws to ISO 2009, 2010, 7047 (DIN 963, 964, 966). Especially suitable for holes with simultaneous countersinking in profile material. HSS-XE Stahl Gefertigt aus hochlegiertem Spezialstahl “XE” für wesentlich höhere Standzeiten gegenüber HSS-Stähle. Zum Senken in folgende Materialien: • Edelstähle (V2A) • Stahl • Guss • Bunt- und Leichtmetalle Verwendung: Bohrung und Senkung werden in einem Arbeitsgang genau fluchtend zueinander gefertigt. Daher sehr stabile und enge Rundlauftoleranzen. Besonders geeignet für NC-Maschinen, da hohe Positionsgenauigkeit, beste Zentriereigenschaft und sehr stabil. Das vorherige Zentrieren kann deshalb oft entfallen. Für Gewindekernlochbohrungen nach DIN 336 Blatt 1 mit Ansenkung 90°. Der nachfolgende Gewindebohrer schneidet dadurch nicht an der scharfen Bohrkante an. Use: Hole and countersink are produced in one operation and precisely aligned. Therefore very sturdy and tight concentricity tolerances. Particularly suitable for NC machines due to high positional accuracy, excellent centering properties and great sturdiness. The preceding centering operation can thus often be omitted. For thread tapping drill holes to DIN 336 sheet 1 with 90° countersink. In the following operation, the tap therefore does not have to cut into the sharp edge of the hole Durchgangsloch mit Senkung für Schraubenkopf in einem Arbeitsgang gebohrt. Through hole with counterbore for screw head drilled in one operation. HSS-XE steel Made of high-alloyed special steel „XE“ for considerably longer service life than HSS-steel. For countersinking in materials: • High-alloyed chromium steel such as stainless (V2A) • Steel • Cast iron • Non-ferrous metals Alu Alu Stahl Steel Edelstahl Stainless Kupfer, Messing, Zinn Copper, brass, tin Kunststoffe GFK/CFK Plastics GRP/CRP Grauguss Grey cast iron ANWENDUNG · APPLICATION KURZSTUFENBOHRER • STUB SUBLAND DRILLS KARNASCH NORM 1515 Schnittdaten Cutting data Film Movie Art. Für Gewinde • For thread • d1 h8 mm d2 h8 mm d3 h8 mm L3 mm L2 mm L1 mm Art. Für Gewinde • For thread • d1 ± 0,05 mm d2 h8 mm d3 h9 mm L3 mm L2 mm L1 mm < 900 N < 900 N > 10% Si HSSXE HSSXE DIN 1897 118° 118° Z 2 Z 2 90º 90º l3 10 Index 9 8 OIL 7 MACHINES 6 5 4 3 2 1
RkJQdWJsaXNoZXIy MTgxNTQ=