306257 306259 306270 306264 1301 Mecanizado de alta velocidad High Speed Cutting Valores orientativos para el uso de las fresas de metal duro de Karnasch para el mecanizado HSC/HHC/HPC Recommended cutting data for solid carbide end mills HSC/HHC/HPC Grupo de material Material group 1.1 – 1.2 – 1.3 – 1.4 – 1.5 Aceros no aleados / Unalloyed steels < 850 N/mm2 2.1 – 2.2 – 2.3 – 2.4 – 2.5 – 2.6 - 3.1 - 3.2 Aceros bonificados / Heat-treated steels < 35 HRC (1200 N/mm2) d1 l3 min1 Vf mm/min fz mm* ap mm ae mm min1 Vf mm/min fz mm* ap mm ae mm 1,5 4 29.000 2.900 0,050 0,120 0,300 28.000 2.800 0,050 0,090 0,240 1,5 6 28.000 2.500 0,045 0,100 0,250 25.000 2.200 0,045 0,080 0,240 1,5 8 25.000 2.000 0,040 0,060 0,160 23.000 1.800 0,040 0,050 0,150 1,5 10 25.000 2.000 0,040 0,060 0,150 23.000 1.800 0,040 0,050 0,150 1,5 12 25.000 2.000 0,040 0,050 0,140 23.000 1.800 0,040 0,050 0,120 1,5 14 23.000 1.610 0,035 0,035 0,100 20.000 1.440 0,036 0,040 0,100 1,5 15 22.000 1.540 0,035 0,035 0,100 20.000 1.400 0,035 0,030 0,100 1,5 16 22.000 1.540 0,035 0,035 0,100 20.000 1.400 0,035 0,030 0,100 1,5 18 22.000 1.540 0,035 0,035 0,100 20.000 1.400 0,035 0,030 0,100 1,5 20 22.000 1.600 0,035 0,035 0,100 20.000 1.450 0,035 0,030 0,100 1,5 25 22.000 1.600 0,030 0,030 0,080 18.000 1.100 0,030 0,020 0,070 1,5 30 20.000 1.000 0,025 0,030 0,060 15.000 600 0,020 0,010 0,040 1,6 8 26.000 2.600 0,050 0,100 0,300 23.000 2.300 0,050 0,090 0,280 1,6 15 21.000 1.600 0,040 0,040 0,110 19.000 1.500 0,040 0,030 0,090 1,8 10 24.000 2.100 0,045 0,060 0,200 23.000 2.300 0,050 0,060 0,160 1,8 20 21.000 1.600 0,040 0,040 0,120 19.000 1.500 0,040 0,040 0,110 2,0 6 21.000 3.100 0,070 0,200 0,600 19.000 2.800 0,075 0,180 0,500 2,0 8 21.000 3.100 0,070 0,140 0,400 19.000 2.800 0,075 0,120 0,350 2,0 10 21.000 3.100 0,070 0,140 0,400 19.000 2.800 0,075 0,120 0,350 2,0 12 19.000 2.300 0,060 0,080 0,200 17.000 2.300 0,068 0,070 0,200 2,0 15 19.000 2.300 0,060 0,080 0,200 17.000 2.300 0,068 0,070 0,200 2,0 20 19.000 2.300 0,060 0,050 0,150 17.000 2.300 0,068 0,040 0,110 2,0 25 17.000 2.000 0,060 0,050 0,120 15.000 1.800 0,060 0,040 0,110 2,0 30 17.000 2.000 0,060 0,030 0,080 15.000 1.800 0,060 0,020 0,080 2,5 10 21.000 3.100 0,070 0,200 0,700 19.000 2.800 0,075 0,200 0,625 2,5 15 19.000 2.300 0,060 0,080 0,250 17.000 2.300 0,070 0,080 0,240 2,5 20 19.000 2.300 0,060 0,060 0,180 17.000 2.300 0,070 0,040 0,120 2,5 25 17.000 2.000 0,060 0,050 0,140 15.000 1.800 0,060 0,040 0,110 3,0 5 17.000 2.500 0,075 0,300 0,800 15.000 2.100 0,070 0,250 0,800 3,0 10 16.000 2.400 0,075 0,200 0,600 15.000 2.100 0,070 0,180 0,550 3,0 15 14.500 2.000 0,070 0,200 0,600 13.000 1.550 0,060 0,180 0,550 3,0 20 14.500 2.000 0,070 0,120 0,250 13.000 1.550 0,060 0,150 0,500 3,0 25 14.500 2.000 0,070 0,080 0,220 13.000 1.550 0,060 0,070 0,200 3,0 30 13.000 1.500 0,060 0,080 0,200 11.500 1.300 0,060 0,070 0,200 4,0 10 11.500 2.300 0,100 0,400 1,000 10.500 2.000 0,095 0,350 1,000 4,0 15 11.500 2.300 0,100 0,250 0,800 10.500 1.900 0,090 0,250 0,750 4,0 20 11.500 2.200 0,095 0,200 0,600 10.500 1.900 0,090 0,200 0,650 4,0 25 10.000 1.800 0,090 0,150 0,450 9.500 1.600 0,090 0,150 0,400 4,0 30 10.000 1.800 0,090 0,100 0,300 9.500 1.600 0,090 0,090 0,250 5,0 10 12.000 3.350 0,140 0,450 1,200 9.000 2.450 0,135 0,450 1,100 5,0 15 12.000 3.250 0,135 0,350 1,100 9.000 2.350 0,130 0,380 1,000 5,0 20 12.000 3.100 0,130 0,350 1,000 9.000 2.250 0,125 0,350 0,950 5,0 25 9.000 2.250 0,125 0,350 0,800 8.100 1.900 0,115 0,310 0,900 5,0 30 8.000 2.000 0,120 0,200 0,600 8.100 1.850 0,110 0,200 0,700 5,0 40 8.000 1.800 0,110 0,200 0,500 7.300 1.600 0,110 0,150 0,500 6,0 10 12.000 3.350 0,140 0,550 1,400 9.000 2.450 0,135 0,450 1,200 6,0 15 12.000 3.250 0,135 0,400 1,200 9.000 2.350 0,130 0,400 1,100 6,0 20 12.000 3.100 0,130 0,350 1,100 9.000 2.250 0,125 0,400 1,100 6,0 25 9.000 3.000 0,125 0,300 0,800 9.000 2.150 0,120 0,380 1,000 6,0 30 8.000 2.000 0,125 0,400 0,700 7.200 1.700 0,120 0,370 1,000 6,0 40 8.000 2.000 0,125 0,250 0,600 7.200 1.700 0,120 0,200 0,600 6,0 50 7.200 1.600 0,110 0,150 0,400 6.500 1.400 0,110 0,120 0,400 Los datos de corte indicados son una recomendación. Los datos de corte reales deben adecuarse siempre al mecanizado y a la máquina. Si la velocidad de giro de la que dispone es inferior a la que se indica en la tabla, el avance debe reducirse en la misma proporción. These conditions are for general guidance; in actual machining conditions adjust the parameters according to your actual machine and workpiece conditions. If the rpm available is lower than recommended please reduce the feed rate to the same ratio. * Por favor, reduzca fz al 70 % de los valores especificados para las fresas de 3 filos. / Please reduce fz to 70% of the specified values for end mills with 3 teeth. 10 Index 9 8 OIL 7 MACHINES 6 5 4 3 2 1
RkJQdWJsaXNoZXIy MTgxNTQ=