306267 306268 30 6269 306258 1306 Grupo de material Material group 1.1 - 1.2 - 1.3 - 1.4 - 1.5 Aceros no aleados / Unalloyed steels < 850 N/mm² 2.1 - 2.2 - 2.3 - 2.4 - 2.5 - 2.6 - 3.1 - 3.2 Aceros bonificados / Heat-treated steels < 35 HRC (1200 N/mm²) d1 r l3 min1 Vf mm/min fz mm ap mm ae mm min1 Vf mm/min fz mm ap mm ae mm 1,0 0,05 4 37.000 3.700 0,025 0,047 0,150 - 0,600 31.000 3.100 0,025 0,038 0,120 - 0,600 1,0 0,05 6 33.000 3.300 0,025 0,026 0,085 - 0,600 28.000 2.800 0,025 0,020 0,070 - 0,600 1,0 0,05 8 33.000 3.300 0,025 0,026 0,085 - 0,600 28.000 2.800 0,025 0,020 0,070 - 0,600 1,0 0,05 10 33.000 3.300 0,025 0,016 0,055 - 0,600 28.000 2.800 0,025 0,012 0,050 - 0,600 1,0 0,05 12 29.000 2.552 0,022 0,016 0,055 - 0,600 25.000 2.000 0,020 0,012 0,050 - 0,600 1,0 0,05 16 29.000 2.320 0,020 0,010 0,035 - 0,600 25.000 2.000 0,020 0,008 0,030 - 0,600 1,0 0,05 20 22.000 1.760 0,020 0,005 0,024 - 0,600 19.000 1.520 0,020 0,005 0,020 - 0,600 1,0 0,1 4 37.000 4.440 0,030 0,068 0,215 - 0,600 31.000 3.348 0,027 0,055 0,180 - 0,600 1,0 0,1 6 33.000 3.300 0,025 0,038 0,125 - 0,600 28.000 3.024 0,027 0,030 0,100 - 0,600 1,0 0,1 8 33.000 3.300 0,025 0,038 0,125 - 0,600 28.000 3.024 0,027 0,030 0,100 - 0,600 1,0 0,1 10 33.000 3.300 0,025 0,023 0,080 - 0,600 28.000 3.024 0,027 0,020 0,070 - 0,600 1,0 0,1 12 29.000 2.900 0,025 0,023 0,080 - 0,600 25.000 2.000 0,020 0,020 0,060 - 0,600 1,0 0,1 16 29.000 2.552 0,022 0,013 0,050 - 0,600 25.000 2.000 0,020 0,010 0,040 - 0,600 1,0 0,1 20 22.000 1.936 0,022 0,008 0,030 - 0,600 19.000 1.520 0,020 0,007 0,030 - 0,600 1,5 0,1 4 28.000 3.360 0,030 0,068 0,220 - 0,800 24.000 2.880 0,030 0,055 0,170 - 0,800 1,5 0,1 8 26.000 2.600 0,025 0,058 0,180 - 0,800 22.000 2.200 0,025 0,045 0,150 - 0,800 1,5 0,1 12 26.000 2.600 0,025 0,058 0,180 - 0,800 22.000 2.200 0,025 0,045 0,150 - 0,800 1,5 0,1 15 23.000 2.300 0,025 0,035 0,118 - 0,800 20.000 1.600 0,020 0,030 0,100 - 0,800 1,5 0,1 20 23.000 2.300 0,025 0,035 0,118 - 0,800 20.000 1.600 0,020 0,030 0,100 - 0,800 2,0 0,05 4 22.000 4.400 0,050 0,138 0,430 - 1,100 18.000 3.600 0,050 0,110 0,350 - 1,100 2,0 0,05 8 22.000 4.400 0,050 0,095 0,310 - 1,100 18.000 3.600 0,050 0,080 0,250 - 1,100 2,0 0,05 12 20.000 3.600 0,045 0,054 0,170 - 1,100 17.000 2.720 0,040 0,045 0,140 - 1,100 2,0 0,05 16 20.000 3.600 0,045 0,054 0,170 - 1,100 17.000 2.720 0,040 0,042 0,140 - 1,100 2,0 0,05 20 20.000 3.600 0,045 0,030 0,110 - 1,100 17.000 2.720 0,040 0,025 0,090 - 1,100 2,0 0,1 4 22.000 4.840 0,055 0,200 0,620 - 1,100 18.000 3.600 0,050 0,160 0,500 - 1,100 2,0 0,1 8 22.000 4.840 0,055 0,138 0,430 - 1,100 18.000 3.600 0,050 0,110 0,340 - 1,100 2,0 0,1 12 20.000 4.000 0,050 0,077 0,250 - 1,100 17.000 3.400 0,050 0,060 0,200 - 1,100 2,0 0,1 16 20.000 4.000 0,050 0,077 0,250 - 1,100 17.000 3.400 0,050 0,060 0,200 - 1,100 2,0 0,1 20 20.000 4.000 0,050 0,047 0,160 - 1,100 17.000 3.400 0,050 0,040 0,120 - 1,100 2,0 0,2 4 22.000 5.280 0,060 0,240 0,700 - 1,200 18.000 3.960 0,055 0,190 0,600 - 1,200 2,0 0,2 8 22.000 5.280 0,060 0,160 0,500 - 1,200 18.000 3.960 0,055 0,140 0,400 - 1,200 2,0 0,2 12 20.000 4.400 0,055 0,100 0,280 - 1,200 17.000 3.740 0,055 0,080 0,250 - 1,200 2,0 0,2 16 20.000 4.400 0,055 0,100 0,280 - 1,200 17.000 3.740 0,055 0,080 0,250 - 1,200 2,0 0,2 20 20.000 4.400 0,055 0,060 0,180 - 1,200 17.000 3.740 0,055 0,060 0,150 - 1,200 2,5 0,1 8 19.000 3.800 0,050 0,175 0,550 - 1,400 16.000 3.200 0,050 0,140 0,440 - 1,400 2,5 0,1 16 18.000 2.880 0,040 0,075 0,250 - 1,400 15.000 2.400 0,040 0,060 0,200 - 1,400 2,5 0,1 20 17.000 3.060 0,045 0,060 0,200 - 1,400 15.000 2.400 0,040 0,050 0,170 - 1,400 2,5 0,2 8 19.000 4.180 0,055 0,220 0,670 - 1,400 16.000 3.200 0,050 0,175 0,540 - 1,400 2,5 0,2 16 18.000 3.240 0,045 0,100 0,300 - 1,400 15.000 2.700 0,045 0,075 0,250 - 1,400 2,5 0,2 20 17.000 3.400 0,050 0,075 0,250 - 1,400 15.000 3.000 0,050 0,060 0,200 - 1,400 3,0 0,2 8 17.000 3.740 0,055 0,295 0,920 - 1,600 14.000 3.080 0,055 0,235 0,750 - 1,600 3,0 0,2 12 17.000 3.740 0,055 0,200 0,640 - 1,600 14.000 3.080 0,055 0,165 0,520 - 1,600 3,0 0,2 16 17.000 3.400 0,050 0,115 0,370 - 1,600 14.000 3.080 0,055 0,094 0,300 - 1,600 3,0 0,2 20 15.000 3.000 0,050 0,115 0,370 - 1,600 13.000 2.600 0,050 0,094 0,300 - 1,600 3,0 0,2 25 15.000 3.000 0,050 0,090 0,320 - 1,600 13.000 2.600 0,050 0,075 0,250 - 1,600 3,0 0,2 30 15.000 3.000 0,050 0,075 0,250 - 1,600 13.000 2.600 0,050 0,060 0,200 - 1,600 3,0 0,3 8 17.000 3.740 0,055 0,310 1,000 - 1,800 14.000 3.080 0,055 0,245 0,780 - 1,800 3,0 0,3 12 17.000 3.740 0,055 0,220 0,700 - 1,800 14.000 3.080 0,055 0,175 0,540 - 1,800 3,0 0,3 16 17.000 3.400 0,050 0,125 0,400 - 1,800 14.000 3.080 0,055 0,100 0,320 - 1,800 3,0 0,3 20 15.000 3.000 0,050 0,125 0,400 - 1,800 13.000 2.600 0,050 0,100 0,320 - 1,800 3,0 0,3 25 15.000 3.000 0,050 0,100 0,350 - 1,800 13.000 2.600 0,050 0,085 0,270 - 1,800 3,0 0,3 30 15.000 3.000 0,050 0,085 0,280 - 1,800 13.000 2.600 0,050 0,070 0,220 - 1,800 3,0 0,5 8 17.000 3.740 0,055 0,330 1,100 - 1,800 14.000 3.080 0,055 0,255 0,800 - 1,800 3,0 0,5 12 17.000 3.740 0,055 0,240 0,730 - 1,800 14.000 3.080 0,055 0,185 0,560 - 1,800 3,0 0,5 16 17.000 3.400 0,050 0,135 0,420 - 1,800 14.000 3.080 0,055 0,110 0,340 - 1,800 3,0 0,5 20 15.000 3.000 0,050 0,135 0,420 - 1,800 13.000 2.600 0,050 0,110 0,340 - 1,800 3,0 0,5 25 15.000 3.000 0,050 0,110 0,370 - 1,800 13.000 2.600 0,050 0,095 0,290 - 1,800 3,0 0,5 30 15.000 3.000 0,050 0,095 0,290 - 1,800 13.000 2.600 0,050 0,080 0,240 - 1,800 4,0 0,2 12 13.000 4.160 0,080 0,340 1,080 - 2,000 11.000 3.520 0,080 0,280 0,860 - 2,000 4,0 0,2 20 11.000 3.080 0,070 0,170 0,550 - 2,000 10.000 2.800 0,070 0,142 0,450 - 2,000 4,0 0,2 30 8.000 2.240 0,070 0,120 0,400 - 2,000 7.000 1.960 0,070 0,100 0,330 - 2,000 4,0 0,2 40 7.000 1.960 0,070 0,090 0,320 - 2,000 7.000 1.960 0,070 0,075 0,250 - 2,000 4,0 0,5 12 13.000 4.160 0,080 0,360 1,150 - 2,200 11.000 3.520 0,080 0,300 0,900 - 2,200 4,0 0,5 20 11.000 3.080 0,070 0,190 0,600 - 2,200 10.000 2.800 0,070 0,155 0,480 - 2,200 4,0 0,5 30 8.000 2.240 0,070 0,130 0,430 - 2,200 7.000 1.960 0,070 0,110 0,350 - 2,200 4,0 0,5 40 7.000 1.960 0,070 0,100 0,350 - 2,200 7.000 1.960 0,070 0,085 0,270 - 2,200 Desbastado Roughing Los datos de corte indicados son una recomendación. Los datos de corte reales deben adecuarse siempre al mecanizado y a la máquina. Si la velocidad de giro de la que dispone es inferior a la que se indica en la tabla, el avance debe reducirse en la misma proporción. These conditions are for general guidance; in actual machining conditions adjust the parameters according to your actual machine and workpiece conditions. If the rpm available is lower than recommended please reduce the feed rate to the same ratio. Nota: Con los mismos valores orientativos, el diseños cilíndrico (30 6267) y el cónico (30 6268) tienen mejor calidad de superficie y una vida útil más larga gracias a la mayor estabilidad del cuello cónico. La mayor estabilidad del cuello cónico permite el aumento del valor fz un máx. del 20 % o el aumento del valor ap un máx. del 10 %. En el mecanizado HSC, las velocidades de giro pueden elevarse hasta el 400%. En este caso, el valor ae deberá hallarse en el rango inferior. Please note: By using the same cutting data for the cylindrical neck (30 6267) and the conical neck (30 6268) you will achieve a better surface and the tool life will improved due to the more stable tool. Due to the more stable neck of the conical tool you can increase the feet per tooth by max. 20% or increase ap max. 10%. You can increase the speed up to 400% in HSC machining. The radial cutting depth ae should be in a lower range. HPC Valores orientativos para el uso de la fresa para matrices de metal duro con radio angular Recommended cutting data for solid carbide end mills with corner radius 10 Index 9 8 OIL 7 MACHINES 6 5 4 3 2 1
RkJQdWJsaXNoZXIy MTgxNTQ=