306486 306486 1351 Grupo de material Material group Resistencia Strength • 2 • 3 • 4 • 5 • 6 • 8 • 10 • 12 N/mm2 1.1-1.2-1.3-1.4-1.5 Aceros no aleados / Unalloyed steels <1100 N/mm2 ap ae n vf 0,04 0,10 38.000 7.500 0,06 0,15 25.500 7.000 0,08 0,20 19.000 6.500 0,10 0,25 16.000 6.000 0,12 0,30 12.000 7.500 0,16 0,40 9.000 6.500 0,20 0,50 7.000 6.000 0,24 0,60 6.000 5.500 2.1-2.2-2.3-2.4-2.52.6 Aceros bonificados / Alloy steels <30 HRC ap ae n vf 0,04 0,10 38.000 7.500 0,06 0,15 25.500 7.000 0,08 0,20 19.000 6.500 0,10 0,25 16.000 6.000 0,12 0,30 12.000 7.000 0,16 0,40 9.000 6.000 0,20 0,50 7.000 5.000 0,24 0,60 6.000 5.000 3.1-3.2 Aceros de alta aleación / High alloy steels <35 HRC ap ae n vf 0,04 0,10 28.000 7.000 0,06 0,15 28.000 6.700 0,08 0,20 24.000 6.000 0,10 0,25 12.000 5.800 0,12 0,30 9.000 5.500 0,16 0,40 7.000 5.000 0,20 0,50 5.500 4.500 0,24 0,60 4.500 4.000 4.1-4.2-4.3 Aceros inoxidables / Stainless steels <45 HRC ap ae n vf 0,04 0,10 26.000 4.500 0,06 0,15 17.000 4.500 0,08 0,20 13.000 4.000 0,10 0,25 11.000 3.800 0,12 0,30 8.500 5.000 0,16 0,40 6.500 4.500 0,20 0,50 5.000 4.000 0,24 0,60 4.000 3.500 8.1 Aceros templados / Hardened steels <55 HRC a ae n vf 0,04 0,10 22.000 3.200 0,06 0,15 15.000 3.100 0,08 0,20 11.000 3.000 0,10 0,25 9.000 3.000 0,12 0,30 7.000 3.500 0,16 0,40 5.200 3.200 0,20 0,50 4.000 2.600 0,24 0,60 3.500 2.400 8.2 Aceros templados / Hardened steels <60 HRC ap ae n vf 0,04 0,10 17.000 2.700 0,06 0,15 11.500 2.500 0,08 0,20 8.500 2.200 0,10 0,25 7.200 2.000 0,12 0,30 6.500 3.000 0,16 0,40 5.000 2.800 0,20 0,50 4.000 2.500 0,24 0,60 3.200 2.200 8.3 Aceros templados / Hardened steels <65 HRC ap ae n vf 0,04 0,10 14.000 2.300 0,06 0,15 9.000 2.200 0,08 0,20 7.000 2.000 0,10 0,25 5.500 1.900 0,12 0,30 5.800 2.500 0,16 0,40 4.200 2.200 0,20 0,50 3.500 2.000 0,24 0,60 2.800 1.500 8.3 Aceros templados / Hardened steels <70 HRC ap ae n vf 0,04 0,10 8.500 1.400 0,06 0,15 5.500 1.300 0,08 0,20 4.400 1.200 0,10 0,25 3.500 1.100 0,12 0,30 3.700 1.500 0,16 0,40 2.800 1.300 0,20 0,50 2.200 1.200 0,24 0,60 1.800 1.000 Grupo de material Material group Resistencia Strength • 2 • 3 • 4 • 5 • 6 • 8 • 10 • 12 N/mm2 1.1-1.2-1.3-1.4-1.5 Aceros no aleados / Unalloyed steels <1100 N/mm2 ap ae n vf 0,04 0,10 55.000 10.000 0,06 0,15 35.000 9.500 0,08 0,20 27.000 9.000 0,10 0,25 22.000 8.000 0,12 0,30 18.000 11.000 0,16 0,40 13.500 10.000 0,20 0,50 11.000 9.000 0,24 0,60 9.000 8.500 2.1-2.2-2.3-2.4-2.52.6 Aceros bonificados / Alloy steels <30 HRC ap ae n vf 0,04 0,10 55.000 9.500 0,06 0,15 35.000 9.000 0,08 0,20 27.000 8.500 0,10 0,25 22.000 7.500 0,12 0,30 18.000 10.000 0,16 0,40 13.500 9.500 0,20 0,50 11.000 8.500 0,24 0,60 9.000 8.000 3.1-3.2 Aceros de alta aleación / High alloy steels <35 HRC ap ae n vf 0,04 0,10 45.000 9.000 0,06 0,15 30.000 8.500 0,08 0,20 23.000 8.000 0,10 0,25 20.000 7.500 0,12 0,30 17.000 10.000 0,16 0,40 12.500 9.500 0,20 0,50 10.000 8.500 0,24 0,60 8.500 8.000 4.1-4.2-4.3 Aceros inoxidables / Stainless steels <45 HRC ap ae n vf 0,04 0,10 44.000 8.200 0,06 0,15 29.000 7.500 0,08 0,20 22.000 6.500 0,10 0,25 18.000 6.200 0,12 0,30 16.500 9.800 0,16 0,40 12.500 8.500 0,20 0,50 9.500 7.500 0,24 0,60 8.000 7.000 8.1 Aceros templados / Hardened steels <55 HRC ap ae n vf 0,04 0,10 36.000 6.200 0,06 0,15 24.500 5.200 0,08 0,20 18.000 4.800 0,10 0,25 15.000 5.000 0,12 0,25 14.000 7.000 0,16 0,40 10.000 6.000 0,20 0,50 8.000 5.500 0,24 0,50 7.000 5.000 8.2 Aceros templados / Hardened steels <60 HRC ap ae n vf 0,04 0,10 27.000 4.200 0,06 0,15 18.000 3.800 0,08 0,20 13.000 3.500 0,10 0,25 11.000 3.200 0,12 0,25 11.000 5.000 0,16 0,40 8.000 4.500 0,20 0,50 6.500 4.000 0,24 0,50 5.500 3.500 8.3 Aceros templados / Hardened steels <65 HRC ap ae n vf 0,04 0,10 25.000 4.000 0,06 0,15 17.000 3.500 0,08 0,20 13.000 3.200 0,10 0,25 10.000 3.000 0,12 0,25 10.000 4.500 0,16 0,40 7.500 4.000 0,20 0,50 6.000 3.200 0,24 0,50 5.000 2.800 8.3 Aceros templados / Hardened steels <70 HRC ap ae n vf 0,04 0,10 17.500 2.700 0,06 0,15 11.500 2.500 0,08 0,20 8.500 2.200 0,10 0,25 7.000 2.000 0,12 0,25 7.000 2.500 0,16 0,40 5.100 2.400 0,20 0,50 4.100 2.200 0,24 0,50 3.500 1.800 Acabado HPC (corte de alta velocidad)/HPC-Finishing Acabado HSC (corte de alta velocidad)/HSC-Finishing Valores orientativos para el uso de fresas esféricas de metal duro, HSC, HRC 3D de Karnasch: High-Performance Recommended cutting data for Karnasch solid carbide ball nose 3D – 4 flutes Valores orientativos para el uso de fresas esféricas de metal duro, HSC, HRC 3D de Karnasch: High-Performance Recommended cutting data for Karnasch solid carbide ball nose 3D – 4 flutes Processing information: 1. Conditions must be: rigid machine circumstances and excellent holders. 2. Reduce the cutting data when you machine with long neck length. 3. The stated cutting data belongs to a neck length of max 4×D and a tapered workpiece of max. 15°. 4. If the corneradius of the workpiece contour is smaller than 1,5× end mill radius or the workpiece contour is to steep, you have to reduce the cutting data up to 50% 10 Index 9 8 OIL 7 MACHINES 6 5 4 3 2 1
RkJQdWJsaXNoZXIy MTgxNTQ=