114701 114702 862 1517 1517 6 mm 6 mm 30 mm 60 mm Para obtener más información, llame al número +49 6203-4039-0 o escriba un correo electrónico a info@karnasch.tools. For more informations please call +49 6203-4039-0 send a mail to info@karnasch.tools. Para utilizar con un taladro / taladro inalámbrico fuerte. Con esta sierra perforadora es posible traspasar la placa frontal templada, de ese cilindro de alta seguridad, la cual se encuentra delante del núcleo, para poder extraer a continuación el núcleo. Características de la herramienta: • 4 × dientes sierras circulares de carburo ∅ 15,2 • Guiado amortiguado de espiga (6,8 mm) para centrado en el canal de cierre • Tope de profundidad To be used with a drilling machine/strong battery drill. With this holesaw it is possible to penetrate the hardened front plate of this special high security locking cylinder that sits in front of the core and then to retrieve the core. Properties of the tool: • 4 × T.C.T. teeth ∅ 15.2 • Sprung pin guide (6.8 mm) for centring in the locking channel • Depth stop FRESA PERFORADORA PARA SERVICIOS DE APERTURA DE PUERTAS DRILL FOR LOCKSMITHS SIERRAS CIRCULARES DE CARBURO PARA CILINDROS DE CIERRE ABLOY PROTEC T.C.T. HOLESAWS FOR ABLOY PROTEC LOCKING CYLINDERS Fresa perforadora de metal duro y macizo de última generación. Abre cilindros de cierre en tiempo record. Los mejores resultados se obtienen con amoladora recta (véase la página 1226/1227). Agrandamiento de agujeros también con taladros inalámbricos. Junto con las fresas (página 860) da como resultado la combinación ideal de herramientas. Con la fresa perforadora se agranda el agujero del cilindro en muy breve tiempo en forma rectilínea. Por lo general, el cilindro de cierre ya debería poder cerrarse. Si no es así, p. ej. en el caso de seguros especiales de protección contra perforaciones, el agujero se amplía lateralmente con una fresa (véase la página 861). Solid carbide drill of the newest generation. Opens locking cylinders in record time. Best results are achieved with straight grinders (see page 1226/1227). Also drilling with drilling/battery drills. Together with burs (page 860), the ideal tool combination is achieved. With the drill, the cylinder is drilled in a straight line in the shortest possible time. Usually, the locking cylinder can already be closed now. If not, e.g., in case of special drill prevention, the borehole is sideways expanded with a bur (see page 861). BLUETEC L E CON RECUBRIMIENTO COATED Datos de corte Cutting data Vídeo Movie Datos de corte Cutting data Vídeo Movie 15,2 mm 10 mm 15 mm 70 mm 10 Index 9 8 OIL 7 MACHINES 6 5 4 3 2 1
RkJQdWJsaXNoZXIy MTgxNTQ=